Article Content
Abstract
Silver powders play a pivotal role in electronic applications due to their superior conductivity and chemical stability, where morphology and particle size critically determine performance. This work presents a controllable liquid-phase reduction strategy to synthesize spherical silver powders using ascorbic acid as an eco-friendly reductant and polyvinylpyrrolidone (PVP) as a morphology-directing agent. Key synthesis parameters, including reactant mixing mode, temperature (30 °C), silver nitrate concentration (0.2 mol/L), PVP dosage (5 wt%), and reducing solution pH (3.3), were systematically optimized to achieve monodisperse spherical particles with an average size of 2 μm. When formulated into sintered conductive pastes with 75 wt% silver loading, the optimized powder enabled exceptional electrical and mechanical performance: a low sheet resistance of 5.3 mΩ/sq and robust adhesion exceeding 20 N. These results demonstrate a scalable route to tailor silver powders for high-performance electronic interconnects in photovoltaic and 5G modules, balancing cost-efficiency with functional reliability.
Explore related subjects
Discover the latest articles and news from researchers in related subjects, suggested using machine learning.
- Nanocomposites
- Nanomaterial
- Nanoparticle Synthesis
- Nanoparticles
- Supercapacitors
- Solid-phase Synthesis
References
-
C.X. Zhang, P. Chen, J. Liu, Y.H. Zhang, W. Shen, H.L. Xu, and Y. Tang, Ag microparticles embedded in Si nanowire arrays: a novel catalyst for gas-phase oxidation of high alcohol to aldehyde. Chem. Commun. 28, 3290 (2008).
-
M.A. Amin, S.A. Fadlallah, and G.S. Alosaimi, In situ aqueous synthesis of silver nanoparticles supported on titanium as active electrocatalyst for the hydrogen evolution reaction. Int. J. Hydrog. Energy 39, 19519 (2014).
-
Y.T. Liu, J. Ding, J.Y. Yang, J.C. Bi, K.F. Liu, and J.G. Chen, Stabilization of copper catalysts for hydrogenation of dimethyl oxalate by deposition of Ag clusters on Cu nanoparticles. Catal. Commun. 98, 43 (2017).
-
P. Peng, H. Huang, A.M. Hu, A.P. Gerlich, and Y.N. Zhou, Functionalization of silver nanowire surfaces with copper oxide for surface-enhanced Raman spectroscopic bio-sensing. J. Mater. Chem. 22, 15495 (2012).
-
R.A. Bapat, T.V. Chaubal, C.P. Joshi, P.R. Bapat, H. Choudhury, M. Pandey, B. Gorain, and P. Kesharwani, An overview of application of silver nanoparticles for biomaterials in dentistry. Mater. Sci. Eng. C-Mater. Biol. Appl. 91, 881 (2018).
-
F. Mattea, J. Vedelago, F. Malano, C. Gomez, M.C. Strumia, and M. Valente, Silver nanoparticles in x-ray biomedical applications. Radiat. Phys. Chem. 130, 442 (2017).
-
H.Y. Wang, Y.P. Tai, R.X. Li, H. Wang, and J.T. Bai, Effect of the mass ratio of micron and submicron silver powder in the front electrode paste on the electrical performance of crystalline silicon solar cells. RSC Adv. 6, 28289 (2016).
-
A. Kosmala, R. Wright, Q. Zhang, and A. Kirby, Synthesis of silver nano particles and fabrication of aqueous Ag inks for inkjet printing. Mater. Chem. Phys. 129, 1075 (2011).
-
M.J. Yim, Y. Li, K.S. Moon, K.W. Paik, and C.P. Wong, Review of recent advances in electrically conductive adhesive materials and technologies in electronic packaging. J. Adhes. Sci. Technol. 22, 1593 (2008).
-
H. Yang, L. Huang, M. Zhu, and Y. Cai, Research progress on preparation technology of silver powder and silver conductive paste. Electron. Compon. Mater. 37, 1 (2018).
-
Y.P. Mamunya, Y.V. Muzychenko, P. Pissis, E.V. Lebedev, and M.I. Shut, Percolation phenomena in polymers containing dispersed iron. Polym. Eng. Sci. 42, 90 (2002).
-
T. Ahmad, I.A. Wani, and S. Khatoon, NSTI Nanotechnology Conference and Expo (Boston: Crc Press-Taylor & Francis Group, 2011), pp.292–298.
-
L. Avramovic, M.M. Pavlovic, V.M. Maksimovic, M. Vukovic, J.S. Stevanovic, M. Bugarin, and N.D. Nikolic, Comparative morphological and crystallographic analysis of electrochemically- and chemically-produced silver powder particles. Metals 7, 14 (2017).
-
S.Y. Yang, and S.G. Kim, Characterization of silver and silver/nickel composite particles prepared by spray pyrolysis. Powder Technol. 146, 185 (2004).
-
B. Tang, S.P. Xu, J. An, B. Zhao, and W.Q. Xu, Photoinduced shape conversion and reconstruction of silver nanoprisms. J. Phys. Chem. C 113, 7025 (2009).
-
K. Zou, X.H. Zhang, X.F. Duan, X.M. Meng, and S.K. Wu, Seed-mediated synthesis of silver nanostructures and polymer/silver nanocables by UV irradiation. J. Cryst. Growth 273, 285 (2004).
-
L. Li, J. Sun, X.R. Li, Y. Zhang, Z.X. Wang, C.R. Wang, J.W. Dai, and Q.B. Wang, Controllable synthesis of monodispersed silver nanoparticles as standards for quantitative assessment of their cytotoxicity. Biomaterials 33, 1714 (2012).
-
Y.G. Sun, and Y.N. Xia, Shape-controlled synthesis of gold and silver nanoparticles. Science 298, 2176 (2002).
-
D.B. Yu, and V.W.W. Yam, Controlled synthesis of monodisperse silver nanocubes in water. J. Am. Chem. Soc. 126, 13200 (2004).
-
S.P. Wu, and S.Y. Meng, Preparation of ultrafine silver powder using ascorbic acid as reducing agent and its application in MLCI. Mater. Chem. Phys. 89, 423 (2005).
-
S.P. Wu, Preparation of micron size flake silver powders for conductive thick films. J. Mater. Sci.-Mater. Electron. 18, 447 (2007).
-
Z. Qin, W. Zhang, J. Kuang, W. Li, and P. Yang, Research on preparation of spherical silver powder using succinic acid as dispersant. Electron. Compon. Mater. 29, 11 (2010).
-
X.H. Bai, P. Zhang, Z.D. Lin, I. Destech Publications, In International Conference on Advanced Manufacture Technology and Industrial Application (AMTIA), (Destech Publications, Inc: Shanghai, Peoples R China, 2016), pp. 1–5.
-
L.J. Yan, T. Chen, Q. Wang, and G.X. Chen, Influence of different reducing agents on the growth morphology of silver particles. Packag. Eng. 40, 81 (2019).
-
T. Qin, H.Q. Ye, C. Wu, H. Dong, G.G. Liu, and M.Q. Hao, Effects of PVP on properties of micro-sized silver powders prepared by liquid phase reduction method. J. Central S. Univ. Sci. Technol. 44, 2675 (2013).
-
X.Y. Guo, D. Deng, Y. Li, and Q.H. Tian, Preparation of spherical microsized silver powder by liquid reduction method and its dispersion mechanism. Chin. J. Nonferrous Metals 25, 2484 (2015).
-
C.B. Whitehead, S. Özkar, and R.G. Finke, LaMer’s 1950 model for particle formation of instantaneous nucleation and diffusion-controlled growth: a historical look at the model’s origins, assumptions, equations, and underlying sulfur sol formation kinetics data. Chem. Mat. 31, 7116 (2019).
-
C.B. Whitehead, S. Özkar, and R.G. Finke, LaMer’s 1950 model of particle formation: a review and critical analysis of its classical nucleation and fluctuation theory basis, of competing models and mechanisms for phase-changes and particle formation, and then of its application to silver halide, semiconductor, metal, and metal-oxide nanoparticles. Mater. Adv. 2, 186 (2021).
-
V.K. LaMer, and R.H. Dinegar, Theory, production and mechanism of formation of monodispersed hydrosols. J. Am. Chem. Soc. 72, 4847 (1950).
-
H.S. Wang, X.L. Qiao, J.G. Chen, X.J. Wang, and S.Y. Ding, Mechanisms of PVP in the preparation of silver nanoparticles. Mater. Chem. Phys. 94, 449 (2005).
-
W. Xie, Y.Y. Zheng, J.C. Kuang, Z. Wang, S.H. Yi, and Y.J. Deng, Preparation of disperse silver particles by chemical reduction. Russ. J. Phys. Chem. A 90, 848 (2016).
-
Y. Ying, H.E. Wei, W. Shouxu, C. Yuanming, and H.U. Ke, Preparation of epoxy-silver composite conductive silver paste. Electron. Compon. Mater. 29, 54 (2010).
-
K.K. Hong, S.B. Cho, J.S. You, J.W. Jeong, S.M. Bea, and J.Y. Huh, Mechanism for the formation of Ag crystallites in the Ag thick-film contacts of crystalline Si solar cells. Sol. Energy Mater. Sol. Cells 93, 898 (2009).
-
S.A. Ketkar, G.G. Umarji, G.J. Phatak, J.D. Ambekar, U.P. Mulik, and D.P. Amalnerkar, Effect of glass content variation on properties of photoimageable silver conductor paste. Mater. Chem. Phys. 96, 145 (2006).
-
S.Z. Liu, D.S. Tan, and C.J. Lv, Research on preparation of fine silver powder by ascorbic acid reduction. Powder Metall. Ind. 19, 5 (2009).
-
H P. Wu and Z. Han, Study on preparation of spherical silver powder using gelatin as a dispersant. Solar Energy (2023).
Acknowledgments
The authors gratefully acknowledge the support provided by Guangdong S&T program (2023B0101200001), National Natural Science Foundation of China (No. 22461142142, 52372109, 52202133, 52371074, U24A20203), the Guangdong Basic and Applied Basic Research Foundation (2023A1515010373, 2023A1515140060), the Dongguan Innovative Research Team Program (2020607101007), Natural Science Foundation of Hubei Province, China (Grant No. 2022CFA031), the Innovation Project of Optics Valley Laboratory (Grant No. OVL2023ZD001), the Dongguan Key Research &Development Program, China (No. 20221200300032), and also acknowledge financial support from the Bualuang ASEAN Chair Professor Research Grant.
Ethics declarations
Conflict of interests
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
Reprints and permissions
About this article
Cite this article
Wang, X., Ma, W., Hu, Y. et al. Engineered Spherical Silver Powders for Low-Resistance Sintered Conductive Pastes. J. Electron. Mater. (2025). https://doi.org/10.1007/s11664-025-12156-3
- Received
- Accepted
- Published
- DOI https://doi.org/10.1007/s11664-025-12156-3
Keywords
- Spherical silver powder
- liquid-phase reduction
- morphology control
- conductive pastes
- sheet resistance
- adhesion strength